LASAK s.r.o. << back
| Address |
Českobrodská 1047/46 Praha 9 190 00 Czech Republic |
|---|---|
| Location |
Array ( PRAGODENT 2021 ) |
| Phones | +420/ 224 315 663 |
|---|---|
| E-mails | info@lasak.cz |
| WWW | www.lasak.cz |
Represented brands
BioCam®
BioniQ®
Collagene AT®
Cranio-Oss
Cytoplast®
IMPLADENT
IMPLASPIN
OssaBase®-HA
Penguin RFA
PORESORB®-TCP
To be found at the exhibition
BioniQ® - a complex implantology system
The BioniQ® implant system includes BioniQ® implants, inserted at the bone level, and BioniQ® Plus implants, allowing insertion at the soft tissue level. In both cases, from a diameter of 2.9 mm. The BioniQ® system contains tapered and cylindrical Straight screw implants. All implants are supplied with a hydrophilic, nanostructured, bioactive surface. The BioniQ® system is therefore a truly comprehensive implantology system for the treatment of all situations.
The BioniQ® implant system includes BioniQ® implants, inserted at the bone level, and BioniQ® Plus implants, allowing insertion at the soft tissue level. In both cases, from a diameter of 2.9 mm. The BioniQ® system contains tapered and cylindrical Straight screw implants. All implants are supplied with a hydrophilic, nanostructured, bioactive surface. The BioniQ® system is therefore a truly comprehensive implantology system for the treatment of all situations.
BioniQ® pilot-guided surgery
Pilot-guided surgery ensures the optimal position of the implant without increasing the time required for surgery and the need to use the extensive instruments necessary for fully guided surgery. In the case of pilot-guided surgery, only drilling with an S2.9 drill bit at the beginning of the preparation is performed using a template. The other instruments are then used according to the standard BioniQ® surgical protocol. Further preparation and insertion of the implant takes place with the template already removed.
Pilot-guided surgery ensures the optimal position of the implant without increasing the time required for surgery and the need to use the extensive instruments necessary for fully guided surgery. In the case of pilot-guided surgery, only drilling with an S2.9 drill bit at the beginning of the preparation is performed using a template. The other instruments are then used according to the standard BioniQ® surgical protocol. Further preparation and insertion of the implant takes place with the template already removed.
BioniQ® Plus - the ideal implant for non-ideal conditions
The BioniQ® Plus implant is a single-phase implant intended for insertion mainly into the distal section. It is also advantageous to use it in places with a narrow alveolus without the need for bone augmentation and in places with a relative lack of vertical bone size. The BioniQ® Plus implant has a 1.7 mm high polished neck. It is compatible with all BioniQ® implant instruments and prosthetic components of QR and QN platforms. The intraosseous part of the implant is provided with a BIO surface.
The BioniQ® Plus implant is a single-phase implant intended for insertion mainly into the distal section. It is also advantageous to use it in places with a narrow alveolus without the need for bone augmentation and in places with a relative lack of vertical bone size. The BioniQ® Plus implant has a 1.7 mm high polished neck. It is compatible with all BioniQ® implant instruments and prosthetic components of QR and QN platforms. The intraosseous part of the implant is provided with a BIO surface.
BioniQ® S2.9 - narrow hydrophilic titanium implant
Narrow implants BioniQ® S2.9 offers optimal solutions in situations where treatment with conventional implants is problematic or impossible. They are made of high-strength titanium and, like all BioniQ® implants, have a hydrophilic, nanostructured BIO surface. The QN prosthetic platform, specially developed for S2.9 narrow implants, reflects the requirements for comfort and flexibility of treatment and contains all the usual prosthetic components for cemented, screwed and hybrid restorations.
Narrow implants BioniQ® S2.9 offers optimal solutions in situations where treatment with conventional implants is problematic or impossible. They are made of high-strength titanium and, like all BioniQ® implants, have a hydrophilic, nanostructured BIO surface. The QN prosthetic platform, specially developed for S2.9 narrow implants, reflects the requirements for comfort and flexibility of treatment and contains all the usual prosthetic components for cemented, screwed and hybrid restorations.
CAD / CAM construction BioCam®
• Aesthetic constructions without abutments • High passive accuracy • Homogeneous structure without defects BioCam® technology offers a unique system for the production of precise structures enabling the fixation of the prosthesis to implants without the use of abutments. This reduces the number of interfaces between the implant and the denture - potential sources of bacterial contamination. By using the latest technology and certified materials, structural homogeneity and high accuracy are achieved with a large range of manufactured structures.
• Aesthetic constructions without abutments • High passive accuracy • Homogeneous structure without defects BioCam® technology offers a unique system for the production of precise structures enabling the fixation of the prosthesis to implants without the use of abutments. This reduces the number of interfaces between the implant and the denture - potential sources of bacterial contamination. By using the latest technology and certified materials, structural homogeneity and high accuracy are achieved with a large range of manufactured structures.
Fully guided BioniQ® surgery
The BioniQ® fully navigated surgery solution is designed for prosthetically controlled individual treatment with BioniQ® implants using a surgical template that guides all instruments in precise trajectories. It is equipped with titanium housings with tool stops to achieve a pre-planned depth of preparation and ensures the insertion of implants into precise prosthetic positions. Thanks to the used diameter of the guide sleeves, it is possible to insert the implants themselves without removing the surgical template.
The BioniQ® fully navigated surgery solution is designed for prosthetically controlled individual treatment with BioniQ® implants using a surgical template that guides all instruments in precise trajectories. It is equipped with titanium housings with tool stops to achieve a pre-planned depth of preparation and ensures the insertion of implants into precise prosthetic positions. Thanks to the used diameter of the guide sleeves, it is possible to insert the implants themselves without removing the surgical template.
Glued Uni-Base®
Uni-Base® universal titanium bases enable the use of a fully digital CAD / CAM process as well as a conventional method of fabricating superstructures by casting. Bases marked AN allow the construction of an angled shaft for the screw so that the mouth of the shaft comes out in a suitable place in the crown. Uni-Base® bases have an optimized step and the course of the gingival part that maximally respects the healing rollers. The strong, robust design of the bases is optimized for milling processes.
Uni-Base® universal titanium bases enable the use of a fully digital CAD / CAM process as well as a conventional method of fabricating superstructures by casting. Bases marked AN allow the construction of an angled shaft for the screw so that the mouth of the shaft comes out in a suitable place in the crown. Uni-Base® bases have an optimized step and the course of the gingival part that maximally respects the healing rollers. The strong, robust design of the bases is optimized for milling processes.
Individualizable Cast-On pillars
The individualizable Cast-On pillars offer a simple solution for the superstructure carried by the implant. It offers the dental technician maximum flexibility to take into account individual requirements. The abutment allows prosthetic treatment even in cases where the standard system abutment is unsatisfactory. It can be used for fixed cemented as well as conditionally removable. Conventional modeling waxes and resins can be used for modeling, which adhere well to the plastic modeling tube.
The individualizable Cast-On pillars offer a simple solution for the superstructure carried by the implant. It offers the dental technician maximum flexibility to take into account individual requirements. The abutment allows prosthetic treatment even in cases where the standard system abutment is unsatisfactory. It can be used for fixed cemented as well as conditionally removable. Conventional modeling waxes and resins can be used for modeling, which adhere well to the plastic modeling tube.
OssaBase®-HA - synthetic material for bone regeneration
OssaBase®-HA is a synthetic material for bone regeneration based on hydroxyapatite with slow resorption. Provides replacement of missing or lost bone tissue alone or in combination with own bone tissue, blood or PRP. OssaBase®-HA achieves up to 83% continuous porosity to support vascularized bone formation. The slow resorption characteristic helps ensure long-term implant stability and volume retention in cases where a longer healing time is required.
OssaBase®-HA is a synthetic material for bone regeneration based on hydroxyapatite with slow resorption. Provides replacement of missing or lost bone tissue alone or in combination with own bone tissue, blood or PRP. OssaBase®-HA achieves up to 83% continuous porosity to support vascularized bone formation. The slow resorption characteristic helps ensure long-term implant stability and volume retention in cases where a longer healing time is required.
The first hydrophilic, nanostructured BIO surface
LASAK was the first company on the European market to offer a hydrophilic, nanostructured, bioactive surface treatment for dental implants - the BIO surface. Dental implants with a BIO surface significantly accelerate and improve the process of osseointegration and optimize the stability of the implant in the critical initial healing time, which leads to increased predictability and success of treatment and allows the use of new progressive clinical procedures that significantly shorten treatment time.
LASAK was the first company on the European market to offer a hydrophilic, nanostructured, bioactive surface treatment for dental implants - the BIO surface. Dental implants with a BIO surface significantly accelerate and improve the process of osseointegration and optimize the stability of the implant in the critical initial healing time, which leads to increased predictability and success of treatment and allows the use of new progressive clinical procedures that significantly shorten treatment time.
